RX DSP GROUP
107 APF WIDTH
Function: Selects the Bandwidth of the Audio Peak Filter.
Available Values: NARROW, MEDIUM or WIDE
Default Setting: MEDIUM
108 CONTOUR LEVEL
Function: Adjusts the gain of the Contour filter.
Available Values: -40 ~ 0 ~ 20 dB
Default Setting: -15 dB
109 CONTOUR WIDTH
Function: Adjusts the Q-factor of the Contour filter.
Available Values: 1 ~ 11
Default Setting: 10
110 DNR LEVEL
Function: Set the Digital Noise Response.
Available Values: 1 ~ 15
Default Setting: 3
111 IF NOTCH WIDTH
Function: Selects the bandwidth of the DSP NOTCH filter.
Available Values: NARROW or WIDE
Default Setting: WIDE
112 HF CW SHAPE
Function: Selects the passband characteristics of the DSP filter for the CW mode on the HF band.
Available Values: SOFT or SHARP
Default Setting: SOFT
SOFT: Primary importance is attached to the phase of the filter factor.
SHARP: Primary importance is attached to the amplitude of the filter factor.
113 HF CW SLOPE
Function: Selects the shape factor of the DSP filter for the CW mode on the HF band.
Available Values: STEEP, MEDIUM or GENTLE
Default Setting: MEDIUM
|
114 6M CW SHAPE
Function: Selects the passband characteristics of the DSP filter for the CW mode on the 50 MHz band.
Available Values: SOFT or SHARP
Default Setting: SOFT
SOFT: Primary importance is attached to the phase of the filter factor.
SHARP: Primary importance is attached to the amplitude of the filter factor.
115 6M CW SLOPE
Function: Selects the shape factor of the DSP filter for the CW mode on the 50 MHz band.
Available Values: STEEP, MEDIUM or GENTLE
Default Setting: MEDIUM
116 HF PSK SHAPE
Function: Selects the passband characterisics of the DSP filter for the PSK mode on the HF bands.
Available Values: SOFT or SHARP
Default Setting: SHARP
SOFT: Primary importance is attached to the phase of the filter factor.
SHARP: Primary importance is attached to the amplitude of the filter factor.
117 HF PSK SLOPE
Function: Selects the shape factor of the DSP filter for the PSK mode on the HF band.
Available Values: STEEP, MEDIUM or GENTLE
Default Setting: MEDIUM
118 HF FSK SHAPE
Function: Selects the passband characterisics of the DSP filter for the FSK mode on the HF bands.
Available Values: SOFT or SHARP
Default Setting: SHARP
SOFT: Primary importance is attached to the phase of the filter factor.
SHARP: Primary importance is attached to the amplitude of the filter factor.
119 HF FSK SLOPE
Function: Selects the shape factor of the DSP filter for the FSK mode on the HF band.
Available Values: STEEP, MEDIUM or GENTLE
Default Setting: MEDIUM
Cont'd Next Page Menu Item Details
"RX DSP Group"
|